Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Sienna, TX
Carver Gate Repair handles gate work across Sienna, TX with written pricing and a one-year guarantee on every repair. Sienna’s mix of newer master-planned subdivisions, heavy clay soil that shifts with the seasons, and humid Gulf Coast weather creates specific failure patterns we see on gate systems here more than anywhere else nearby. If your gate won’t open, sags on its hinges, or the motor runs but nothing moves, call (469) 530-2485 and you’ll get a live person who can schedule a technician.
Why Sienna Homes Are Different
Sienna sits on Fort Bend County clay that expands after spring rains and contracts through summer drought. That movement is hard on gate posts. Over a few years, a post that shifted half an inch becomes a gate that drags on the latch side, and a dragging gate burns out a swing operator faster than anything else we see. Most Sienna properties were built in the 2000s and 2010s, which means many original gate installations are now hitting the 10 to 15 year mark where motors, hinges, and control boards start failing in sequence.
Many neighborhoods in Sienna have HOA standards for front-facing gate appearance and height, so a replacement gate or a new motor often needs to match what the community already approved. Humidity is the other factor. We regularly find corroded limit switch contacts and rusted hinge bearings on gates that look fine from the street. That’s not neglect, just the local climate doing what it does to exposed metal and low-voltage wiring.
Our Main Sienna Services
The two calls we get most from Sienna homeowners are for gates that have stopped opening entirely and for motors that hum without moving the gate. Each service has its own page with full details.
Gate Repair in Sienna
Most gate repairs in Sienna come down to the same handful of issues: a hinge that has worn loose and let the gate drop, a bent or broken wheel track, or a post that has drifted out of plumb from soil movement. A technician will check the swing or slide geometry first, because if the gate is fighting its own hardware, no new part will last. We quote the price in writing before any work starts, and the repair carries our written guarantee for a full year. Gate Repair in Sienna
Gate Installation in Sienna
New gate installations in Sienna mean accounting for clay soil, HOA appearance rules, and the gate type that fits the driveway. We install swing gates and slide gates, set posts deep enough to hold their line through wet and dry seasons, and route low-voltage wiring so it’s protected from the humidity that eats connections over time. Every installation starts with a free measure and ends with a written price before any work begins. Gate Installation in Sienna
Gate Motor Repair in Sienna
Gate motor repair in Sienna is usually one of three jobs: a failed capacitor that’s cheap to replace, a limit switch that no longer tells the motor where to stop, or a control board that has given out after years of humidity and power surges. Our technicians carry parts for the major brands in their trucks, so many motor repairs are one visit. The repair is covered by our written guarantee for a full year from the date of service. Gate Motor Repair in Sienna
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sienna
Our technicians work on Linear, Viking, Ghost Controls, and DoorKing systems, among others. We stock common parts for these brands locally, which keeps most Sienna motor repairs to a single visit rather than a diagnosis trip followed by a parts run. See our brands for the full list.
Pricing for Gate Company in Sienna, TX
| Service | Typical range in Sienna |
|---|---|
| Gate repair, minor (hinge, latch, wheel) | $180 – $340 |
| Gate motor repair (parts only) | $200 – $450 |
| Gate motor replacement (parts + labor) | $750 – $1,500 |
| Swing gate installation (single) | $1,200 – $3,000 |
| Slide gate installation | $2,000 – $5,000 |
| Control board replacement | $350 – $800 |
| Limit switch replacement | $150 – $300 |
| Loop detector replacement | $250 – $500 |
| Gate post reset | $400 – $900 |
| Full system diagnostic | $90 – $150 |
What pushes a Sienna price toward the upper end is usually the gate’s condition: a post that needs resetting in clay soil, a motor that’s been fighting a misaligned gate for years, or a control board that requires a specific brand replacement. Whatever the job, the price is quoted in writing before any work starts, and that number does not move at the door.
Neighborhoods We Serve in Sienna
We cover the entire Sienna community, including the older sections built in the mid-2000s and the newer phases still being finished. Technician response time across the Sienna area is typically same-day for repair calls placed before noon.
- Sienna Village of Shipman’s Landing
- Sienna Village of Anderson Springs
- Sienna Village of Bees Creek
- Sawmill Lake
- Heritage Park
Service Area – Cities Near Sienna
Our Sienna crews also cover surrounding communities for homeowners with second properties, rental gates, or family nearby. We serve Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, with technicians dispatched locally to Sienna.
Serving Sienna, TX – Our Local Coverage Area
We’re based in the Sienna area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sienna
Most Sienna repair calls placed before noon get a same-day visit. New installations and full motor replacements are scheduled around parts ordering and take a bit longer, but you’ll get a firm arrival window when you call. The phone number (469) 530-2485 is answered by a live person around the clock.
Repairs that match the existing gate and color generally don’t need HOA approval. Replacements or new installations, especially on front-facing gates, often do. We recommend checking your community’s standards before a new gate install, and we’ll match the existing style where possible. The quote we give you is written, so any changes stay agreed before work begins.
Every repair from Carver Gate Repair carries a written guarantee for a full year from the date of service. If the same repair fails inside that year, we come back at no charge. That’s the standard, not an upsell. Our Sienna customers call the same number, talk to a real person, and get a return visit scheduled.
If your gate is giving you trouble in Sienna, call (469) 530-2485. A live person answers 24/7, the estimate is free, and the price is in writing before the work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sienna Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.