Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Travis Ranch, TX
Carver Gate Repair is the gate company Travis Ranch homeowners call when a gate stops opening, a motor burns out, or a new installation needs to be done right the first time. Our crews work exclusively on gates and gate automation, and every job starts with a written price before any work begins. If you’re dealing with a gate that won’t budge this morning, call (469) 530-2485 and you’ll reach a live person who can schedule a Travis Ranch visit.
Why Travis Ranch Homes Are Different
Travis Ranch sits in Kaufman County, where larger lots and wider driveways mean most gates are doing real work every day. The soil here is a mix of clay and sandy loam, and it moves. We regularly see gate posts in Travis Ranch shift with seasonal moisture changes, which throws operators out of alignment and causes the gate to bind against the latch or drag along the drive. That same soil movement is hard on underground loop detectors and the conduit that carries wiring out to the gate.
The summer heat is the other factor. Steel gates and operator housings in Travis Ranch sit in direct sun for hours, and the thermal cycling is tough on circuit boards, capacitors, and limit switches inside the operator. Homeowners here often have longer driveways with a gate set back from the street, so when something fails, the problem never fixes itself and the gate typically stays stuck until a technician puts hands on it.
Our Main Travis Ranch Services
Two jobs make up the majority of our calls in Travis Ranch: repairs that get a stopped gate moving again, and motor replacements that keep it moving for years. Here’s what each one involves locally.
Gate Repair in Travis Ranch
Repair work in Travis Ranch usually means diagnosing why a gate stopped in the open or closed position, then replacing the failed part rather than papering over it. On swing gates we check the hinges, the operator arm, and the limit switch that tells the motor where to stop. On slide gates we inspect the track, the rollers, and the chain or belt drive. Travis Ranch’s soil movement means we spend extra time checking post alignment and re-setting the operator so the gate doesn’t fight itself. See Gate Repair in Travis Ranch for the full breakdown.
Gate Installation in Travis Ranch
A new gate in Travis Ranch has to be built for this climate and this soil. We pour deeper footings than many crews do, because a gate post that shifts in clay soil means a gate that binds within a year or two. We also run conduit and wiring to handle the distance between a set-back gate and the house. Every installation includes a free measure, a written price, and a schedule that’s agreed before materials get ordered. See Gate Installation in Travis Ranch for what a full install includes.
Gate Motor Repair in Travis Ranch
When a motor fails in Travis Ranch, the question is usually whether to repair or replace. We’ll tell you straight: a capacitor, limit switch, or control board repair makes sense on a newer operator, while a motor over ten years old with a burned winding is usually a replacement candidate. We work on FAAC, BFT, Linear, and Viking systems, and we carry the common parts for those brands in our vehicles so many motor repairs don’t need a second visit. See Gate Motor Repair in Travis Ranch for pricing and turnaround.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Travis Ranch
We service and stock parts for FAAC, BFT, Linear, and Viking operators, which covers most of the motors installed across Travis Ranch. Because we work on these brands every week, we know their failure points and keep the common repair parts on the truck. Browse our brands to see the full list of systems we support.
Pricing for Gate Company in Travis Ranch, TX
These are the price ranges Travis Ranch homeowners can expect for the most common gate jobs. Every job gets a written quote before work starts, so the number you approve is the number you pay.
| Service | Typical range in Travis Ranch |
|---|---|
| General gate repair (labor + common parts) | $180 – $480 |
| Gate motor replacement | $700 – $1,600 |
| Gate installation (manual, single swing) | $900 – $2,500 |
| Gate installation (automated, single swing) | $1,500 – $4,000 |
| Gate installation (automated, slide gate) | $2,500 – $5,800 |
| Hinge replacement (pair, welded or bolted) | $120 – $450 |
| Track and roller replacement (slide gate) | $180 – $650 |
| Limit switch replacement | $90 – $280 |
| Control board replacement | $180 – $600 |
| Safety sensor (photo eye / safety edge) | $90 – $390 |
Two things push a Travis Ranch repair higher than the baseline: a gate set far back from the house that needs a longer power run, and a post that has shifted in the clay soil and needs to be re-set before the gate will operate cleanly again. You’ll know both before we begin, because the written price covers them up front.
Neighborhoods We Serve in Travis Ranch
We cover all of Travis Ranch and the streets throughout the community. Our crews know the local drive patterns and can typically be on site within a same-day window for repairs.
- Travis Ranch proper
- Enchanted Harbor
- Heath Golf & Yacht Club area
- The Orchards
- Woodbridge
Service Area – Cities Near Travis Ranch
While this page covers gate work in Travis Ranch, our crews also serve the larger metro area. If you’re nearby, you can read about gate services in Dallas, TX, Fort Worth, TX, Houston, TX, or San Antonio, FL.
Serving Travis Ranch, TX – Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Travis Ranch
Most Travis Ranch repair calls get a same-day or next-day visit, depending on when you call and how full the schedule is. The phone is answered live 24/7, so call (469) 530-2485 and we’ll give you a straight answer and an arrival window, not a four-hour spread.
That depends on your specific section of Travis Ranch and any covenants attached to your lot. Some neighborhoods require design review before a gate goes up. We can’t file the paperwork for you, but we can give you the dimensions and material details your HOA will ask for.
Yes. Every Travis Ranch job gets a written price before any work begins. If the technician finds something unexpected inside the operator or at the post, we stop and talk to you about it before adding a dollar to the quote. The price is agreed first, and the guarantee is in writing for a full year.
For a free estimate on any gate work in Travis Ranch, call Carver Gate Repair at (469) 530-2485. You’ll talk to a live person, get a straight answer, and schedule a visit around your day.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Travis Ranch Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.