Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Waco, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor repair in Waco, TX, with the same process on every visit: a written price before work starts, a background-checked technician in uniform, and a full-year guarantee in writing. Waco’s mix of older ranch-style homes near Lake Waco, newer subdivisions along West Highway 84, and acreage properties outside Loop 340 means we see everything from rusted chain-link driveway gates to heavy ornamental steel gates with failing swing operators. If your gate won’t open, sags on its hinges, or the motor stopped responding, call (469) 530-2485 and a live person answers.
Why Waco Homes Are Different
Waco’s climate gets the blame for a lot of gate failures we’re called to fix. Summer heat above 100 degrees cooks gate motor circuit boards and stretches drive belts. Spring thunderstorms bring wind gusts that pull gates out of alignment and storms that leave standing water around gate posts, which softens the soil and lets posts lean. The blackland clay common across McLennan County expands and contracts through wet-dry cycles, and a gate that was perfectly plumb in March can bind by August. Homes in older neighborhoods like Brookview and Parkdale often have narrow driveway approaches and mature trees, which means root pressure against gate posts and limited room for a swing operator arm. Newer communities like Whispering Oaks and neighborhoods off China Spring Road tend to have wider drives and heavier decorative steel gates, where an undersized slide operator wears out faster than it should.
HOA and permit realities matter here too. Some Waco HOAs require specific gate styles or finish colors, and repairs that alter the gate’s appearance can need approval before we touch the post. We won’t file that paperwork for you, but we’ll tell you plainly if the repair you’re asking for will raise a flag. County properties outside city limits rarely need a permit for a gate repair, but the same repair inside Waco city limits can, depending on scope. Ask us before we start and we’ll walk you through what we know.
Our Main Waco Services
Garage doors and gates are different trades, and in Waco we get called most often for two things: a gate that won’t open or close reliably, and a swing or slide motor that has gone quiet. Both are covered below, along with full gate installation, each with its own page.
Gate Repair in Waco
Gate repair in Waco usually means one of three problems: a gate that binds on its hinges, a gate post that has shifted out of plumb, or a chain or rack that has come loose. We inspect the full gate path, the hinges or roller trucks, and the operator attachment points before we open a tool bag. Waco’s clay soil is the leading cause of shifted posts, and we correct the gate to the post as it stands when a full post reset isn’t warranted. After any repair, the gate should open and close by hand with no more effort than it took when it was new. If it doesn’t, we’re not done. Gate Repair in Waco
Gate Installation in Waco
A new gate in Waco starts with the driveway itself: width, slope, and how the gate will sit when open. We measure, check the soil at the post locations, and quote a written price that includes the gate, the posts, the operator if you’re adding one, and the hardware. Many Waco homes on acreage properties need a cantilever slide gate because the ground is too uneven for a track-style slide. Others in tighter lots are better served by a swing gate with an articulating arm. You’ll know the full number before any work begins, and that number doesn’t move. Gate Installation in Waco
Gate Motor Repair in Waco
Gate motor repair is its own discipline, and we treat it that way. A motor that hums but doesn’t move is a different failure than a motor that trips its breaker, and neither can be diagnosed by guessing. We test the limit switch, check the loop detector if the system has one, and verify power at the board before we replace anything. Most Waco gate motor failures we see are heat-related, control-board burnout, or a capacitor that let go after a power surge. We carry parts for FAAC, BFT, Linear, Viking, and other major brands, so most motor repairs finish in one visit. Gate Motor Repair in Waco
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Waco
Our Waco technicians work on FAAC, BFT, Linear, and Viking motors as a regular part of the week, along with several other major brands. We carry common control boards, limit switches, and remote transmitters for these systems, which means most motor repairs don’t wait on a parts order. See the full list on our brands page.
Pricing for Gate Company in Waco, TX
| Service | Typical range in Waco |
|---|---|
| Gate repair, minor (hinge adjustment, chain tension, latch alignment) | $145 – $295 |
| Gate repair, moderate (post reset, weld repair, roller replacement) | $295 – $575 |
| Swing gate operator replacement (motor and arm, basic) | $850 – $1,450 |
| Slide gate operator replacement (motor, rack, and receiver) | $1,100 – $1,850 |
| Control board replacement (FAAC, BFT, Linear, Viking) | $275 – $650 |
| Limit switch replacement and calibration | $150 – $250 |
| Loop detector replacement (vehicle loop sensor) | $225 – $425 |
| Remote transmitter or keypad reprogramming | $75 – $150 |
| Full gate installation, single swing (standard steel, no operator) | $2,200 – $4,500 |
| Full gate installation, double swing with operator | $4,500 – $8,800 |
What pushes a Waco job higher is usually access: tight driveways where we can’t get a truck near the post, gates on steep slopes, and post bases that have to be dug through rocky soil along the Brazos River corridor. You’ll get a written price before any work starts, and that price is what you pay. No surprises at the door.
Neighborhoods We Serve in Waco
We run calls across Waco and the surrounding communities, from the older streets near Cameron Park to new construction off Ritchie Road. Our dispatch covers the full metro, and typical response time for a gate repair in Waco is same-day or next-day depending on when you call.
- Brookview
- Parkdale
- Whispering Oaks
- China Spring Road corridor
- Woodway
Service Area – Cities Near Waco
Our Waco crews also serve nearby communities across McLennan County and the northern corridor. If you’re outside Waco proper, we likely still cover your address. We run calls in Cleburne, TX, Keene, TX, Waxahachie, TX, and Alvarado, TX. Dispatch and scheduling coordinate from our Dallas-Fort Worth office, with crews working Waco locally.
Serving Waco, TX – Our Local Coverage Area
We’re based in the Waco area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Waco
Most Waco gate repairs get a same-day or next-day appointment, depending on call volume and where you are in the metro. Emergency calls, meaning a gate stuck open or a vehicle trapped behind a closed gate, get priority routing. Call (469) 530-2485 and a live person confirms the arrival window while you’re on the phone.
Gate repairs rarely require a permit in Waco, but installations that change gate height, set new posts, or add an operator can, especially in HOA-governed neighborhoods. We’ll flag anything that looks like it needs city or HOA approval before we quote. If you’re outside city limits in McLennan County, requirements are usually lighter.
We serve all of Waco, including Woodway, Bellmead, Lacy Lakeview, and the China Spring area, plus surrounding communities toward Cleburne, Keene, Waxahachie, and Alvarado. If you’re unsure whether your address is in range, call (469) 530-2485 and we’ll confirm it right away.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Waco Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.