Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fresno, CA
Gate repair in Fresno is shaped by two things: heat that bakes exposed metal and electronics for months at a stretch, and a housing stock where swing gates on iron posts have been in the ground since the 1960s. We work on those older systems constantly. Fresno homeowners call us when a gate starts dragging, a motor stops responding after a 105-degree afternoon, or a welded hinge finally gives out. The good news is that most Fresno gate problems can be diagnosed in one visit and priced before the tools come off the truck. Call (469) 530-2485 and a real person answers.
Why Fresno Homes Are Different
Fresno’s summer heat is the main driver of gate failures here. Temperatures over 100 degrees for consecutive days soften grease in the gearbox, expand metal hinge plates, and steadily cook the capacitors inside older operator boards. We see more failed transformers and burnt relays between July and September than the rest of the year combined. The Valley’s fine dust also collects inside motor housings and limit-switch assemblies, which shortens component life on gates that run every day.
Most Fresno homes with automated gates were built in two waves: ranch-style and custom homes in the north near Woodward Park, and older perimeter-wall homes through central neighborhoods like the Tower District and Sunnyside. The older steel swing gates often sit on posts set directly in clay-heavy soil. Fresno’s alkaline clay expands when wet and contracts when dry, so posts shift a few degrees over a decade. That changes the gate’s travel arc, which wears the hinges unevenly and eventually throws the motor out of alignment. A repair here is rarely just a part swap; it’s checking the post, the hinge line, and the operator mount together.
Our Main Fresno Services
These are the three gate jobs Fresno homeowners call us about most often. Each has its own page with local pricing and turnaround detail.
Gate Repair in Fresno
Most repair calls in Fresno come down to a gate that’s hard to open, sags at the latch side, or won’t stay closed. We replace bent hinges, cut and re-weld cracked frames, re-seat shifted posts where the concrete allows, and rebuild latch hardware so the gate locks firmly again. On double swing gates that have drifted, the fix often includes re-aligning the two leaves and re-setting the center stops. Every repair gets a written price before work starts. Gate Repair in Fresno breaks down what to expect and what it costs.
Gate Installation in Fresno
A new gate in Fresno has to handle direct sun, wind gusts off the open Valley, and local set-back and height limits that vary block to block. We measure the opening, review the existing posts or plan new ones, and match the gate weight to the right hinges, frame, and operator. We work with steel tube frames, powder-coated finishes, and hardware rated for outdoor heat rather than what looks good in a catalog. Gate Installation in Fresno covers the process from measure to final walk-through.
Gate Motor Repair in Fresno
When a Fresno gate stops mid-travel, hums without moving, or opens but won’t reverse, the motor and its board are the prime suspects. We test the capacitor, the limit switches, the loop detector, and the gear assembly before quoting any parts. Heat-ageing is the common thread here: boards crack, caps swell, and gear grease hardens well before the motor itself fails. Gate Motor Repair in Fresno has the full picture on diagnostics and motor replacement pricing.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
We service Linear, Viking, and DoorKing operators regularly across Fresno, and we keep common boards, capacitors, and remote receivers for those brands stocked on the truck for first-trip repair. That means fewer return visits and less waiting for a part to ship. See our brands for the full working list.
Pricing for Gate Company in Fresno, CA
| Service | Typical range in Fresno |
|---|---|
| Gate repair (labor, most hinge or latch jobs) | $180 – $340 |
| Hinge replacement, heavy steel gate | $220 – $380 |
| Gate frame weld repair (on-site) | $150 – $300 |
| Gate latch or lock replacement | $120 – $240 |
| Gate operator/motor repair (not replacement) | $180 – $340 |
| Gate motor replacement (operator unit) | $650 – $1,400 |
| Control board replacement | $250 – $550 |
| Full gate installation (standard steel swing gate) | $2,500 – $5,000 |
Prices in Fresno push toward the upper end of those ranges when posts have shifted in clay soil and need re-setting, or when the existing wiring run is long and the cable has been patched a few times already. The number you’re quoted is written down before any work starts, and the final invoice matches the quote unless you approve a change first.
Neighborhoods We Serve in Fresno
We run calls across the full Fresno metro most days of the week, and our Fresno crews know the gate styles block by block. Response is typically same-day for repair calls, and we schedule installations by appointment.
- Woodward Park
- Tower District
- Sunnyside
- Fig Garden
- Clovis West area
Service Area – Cities Near Fresno
While most of our work is inside Fresno proper, we also cross the city line for gate jobs in Clovis, CA, Madera, CA, and Fowler, CA. For rail or rural properties farther out, we can route a tech from our Fresno office and schedule around the drive. We also cover Sanger, TX for Texas-area requests that come through our network.
Serving Fresno, CA – Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fresno
Repair calls in Fresno are typically same-day when you call before noon. Call (469) 530-2485 and a live person gives you a straight answer on the next available window.
Most repair work doesn’t need a permit. New installations and any change to gate height, set-back, or automation sometimes do. We work with your HOA or the city on the paperwork, and we won’t start until approval is in hand.
We quote the repair and the work itself, not the drive. You get your written price on site before the first tool comes off the truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.