Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arlington, TX
Carver Gate Repair is a gate company serving Arlington, TX, focused on gate repair, gate installation, and gate motor repair. Arlington’s mix of newer subdivisions and older established neighborhoods means gates here face shifting clay soil, summer heat that wears out circuit boards, and occasional high-wind storms that knock leaf gates off their track. If your gate won’t open, sags on its hinges, or stopped responding to the remote, call (469) 530-2485 and a live person answers, day or night.
Why Arlington Homes Are Different
Arlington’s soil is the biggest factor most homeowners don’t plan for. Expansive clay under much of the city swells after spring rain and shrinks in dry summers. Gate posts set without enough concrete depth, or posts set before the ground settled, shift within a year or two. A gate that scraped the driveway in April may clear it by August and bind again in October. That movement is why we check post plumb and hinge alignment on every service call, not just the motor.
Housing stock matters too. Dalworthington Gardens and older pockets near UTA have wrought-iron and chain-link gates that have been in place for two or three decades. Pantego and newer areas south of I-20 often have ornamental steel driveway gates paired with LiftMaster or Viking operators. Heat is the other constant: Arlington summers push surface temperatures past 140°F on a dark metal gate, which shortens the life of capacitor-based boards in operators. We stock replacements for Gate Repair jobs in Arlington rather than telling a homeowner to wait a week for a part.
Our Main Arlington Services
Arlington homeowners call us most often for two situations: a gate that won’t move at all, and a motor that runs but doesn’t open the gate. Each service has its own Arlington page, linked below.
Gate Repair in Arlington
A sagging gate in Arlington is usually a hinge or post problem made worse by the expansive clay soil. We remove the leaf, reset or replace the hinges, weld cracks in the frame, and rehang the gate so it clears the ground through all four seasons. Wrought-iron gates in older Arlington neighborhoods often need picket straightening after a windstorm, while chain-link gates on rental properties need new tension wire and post caps. Details on Gate Repair in Arlington.
Gate Installation in Arlington
New Arlington gate work should start with the post depth, not the gate itself. We set posts below the clay line and in enough concrete to hold against soil movement, then hang a gate sized to the driveway opening and matched to the operator you already own or plan to add. Installations here run from single swing driveway gates to double leaf ornamental steel to pedestrian gates. See Gate Installation in Arlington for the full scope.
Gate Motor Repair in Arlington
When an operator hums but doesn’t turn, or the gate opens a few feet and stops, the fault is usually the limit switch, capacitor, or a fried control board. Arlington heat accelerates all of those failures. We carry boards and switches for Viking, Ghost Controls, DoorKing, and Elite operators, so most motor repairs are completed in one trip. The full breakdown is on Gate Motor Repair in Arlington.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
Our Arlington trucks carry parts for Viking, Ghost Controls, DoorKing, and Elite operators, among others. We match the board, arm, or remote to the system already on the gate instead of swapping in a mismatched part. Full details on our brands.
Pricing for Gate Company in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Gate repair service call | $75 – $125 (applied to the repair) |
| Hinge replacement (single gate) | $180 – $340 |
| Welding repair (cracked frame or picket) | $150 – $400 |
| Gate rehang and realignment | $250 – $500 |
| Gate motor replacement (operator and arm) | $850 – $2,400 |
| Control board replacement | $250 – $650 |
| Limit switch replacement | $150 – $300 |
| Remote or keypad programming | $75 – $150 |
| New gate installation (single swing, basic steel) | $2,500 – $5,500 |
| New gate installation (double leaf or ornamental) | $5,000 – $12,000 |
Arlington prices run toward the middle of these ranges when clay movement has thrown off the post alignment, or when the motor must be replaced rather than the board. Every job gets a written price before we start work, and that number does not change at the door.
Neighborhoods We Serve in Arlington
We run calls across all of Arlington, from Pantego to Dalworthington Gardens to the subdivisions south of I-20. Dispatch is coordinated from the Dallas-Fort Worth office, with crews stationed in the area daily.
- Pantego
- Dalworthington Gardens
- North Arlington (north of I-30)
- South Arlington (south of I-20)
- West Arlington (near Lake Arlington)
Service Area – Cities Near Arlington
Carver Gate Repair also covers the communities around Arlington. Homeowners in Mansfield, TX, Kennedale, TX, Burleson, TX, and Cedar Hill, TX get the same written-price guarantee and background-checked crews.
Serving Arlington, TX – Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arlington
Most Arlington calls are reached the same day, and emergency calls are dispatched on a 24-hour basis. Phone coverage is live around the clock, so someone always answers. Call (469) 530-2485 and we’ll tell you an arrival window before the technician leaves the shop.
Some Arlington HOAs require design approval before a gate is installed or repainted, and a few have material restrictions. If your neighborhood has an HOA, have the design guidelines ready when we quote. We’ll confirm the scope in writing so you can submit it for approval.
Every repair carries a written 365-Day Done Right Promise. If the same failure returns inside a year, we come back at no charge. The guarantee is in writing on every job, not as a verbal assurance.
If your Arlington gate is down, binding, or making a grinding sound at the motor, call Carver Gate Repair at (469) 530-2485 for a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.