Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Arlington, CA | Carver Gate Repair
We provide independent Ghost Controls gate repair across our Arlington service area, with technicians who carry OEM-compatible parts for same-day fixes on most calls. The difference here is simple: Arlington’s mix of older ranch homes and newer infill means we see everything from decade-old TSS1-XPs on 3-rail ranch gates to fresh ABBT-3625 installs on modern zero-lot-line properties, and we stock parts for both. Call (469) 530-2485 for a free estimate.
We’re not a Ghost Controls dealer. We’re an independent service company that works on their equipment daily. Lonnie Burke, our owner, started in welding and metal fabrication at Los Angeles Trade-Technical College before focusing entirely on gate systems. He’s been doing Gate Repair in Arlington and the greater Los Angeles area for over fifteen years. That background matters when a Ghost Controls arm bracket has cracked from metal fatigue on an Arlington gate that’s been opening and closing since the Bush administration.
Why Arlington Residents Choose Us for Ghost Controls Service
Arlington sits in the flat San Fernando Valley floor where summer temperatures regularly hit 100°F and winter nights can dip into the 30s. That thermal swing is hard on gate motors. Ghost Controls uses sealed DC motors and ABS housings that hold up better than some brands, but the limit switches and battery trays still take a beating. We’ve replaced enough melted battery harnesses on Arlington’s south-facing gates to know which failures show up first.
Our Ghost Controls sales & service operation runs on The Garrison Standard: written price before work starts, background-checked and uniformed technicians, and a 365-Day Done Right Promise on every repair. If something we fixed fails inside that year, we come back free. No argument. The price we write is the price you pay. We’ve seen too many Arlington homeowners get a quote over the phone that doubles once the truck arrives. That doesn’t happen here.
Lonnie still diagnoses most jobs himself on the first visit rather than sending a tech to sell parts the gate doesn’t need. He grew up in Reseda, spent years watching Valley gates rust and sag from neglect, and built this company to fix that pattern. On weekends he watches his daughter play club soccer out near Griffith Park. The same discipline applies to your gate: show up squared away, fix what’s broken, and don’t make the customer ask twice.
Common Ghost Controls Gate Repair Problems We Solve in Arlington
- Battery failure in extreme heat. Ghost Controls systems run on 12V battery backup, and Arlington’s August heat can cook a battery in two summers if the enclosure lacks shade. We see this most on west-facing gates along Van Nuys Boulevard corridor properties. We replace with high-temp-rated batteries and check charging voltage from the solar panel or transformer.
- Articulating arm seal degradation. The rubber boot on Ghost Controls’ AXT and DXT series arms cracks after repeated UV exposure. Arlington’s 280+ days of sun per year accelerates this. Water gets in, the potentiometer corrodes, and the gate starts stopping short or overshooting. We stock replacement arms and can rebuild the mechanical linkage if the housing is still sound.
- Control board failure from power fluctuations. LADWP grid stability in older Arlington neighborhoods isn’t perfect. A surge during a Santa Ana wind event can fry the Ghost Controls PCB, especially on pre-2019 units without onboard surge protection. We test the board, check incoming voltage stability, and install external protection if the site’s history warrants it.
- Limit switch drift on heavy gates. Ghost Controls operators use magnetic limit switches that can lose calibration on gates over 800 lbs. Arlington has plenty of custom wrought-iron work from the 1970s and 80s that exceeds this weight. We recalibrate, upgrade to heavier-duty arms if needed, and verify the gate is properly balanced so the motor isn’t fighting inertia.
- Remote and keypad sync issues. The Ghost Controls GHOSTCODE encryption can desync after power loss or interference from nearby WiFi extenders. In Arlington’s denser blocks near the 170 freeway, 2.4GHz congestion is real. We reprogram remotes, check antenna placement, and switch frequency bands on multi-device properties.
Ghost Controls Service in Arlington: What Local Conditions Mean for Your Equipment
Here’s the Arlington-specific factor that shapes every Ghost Controls repair we do: this neighborhood’s soil is expansive clay, heavy with bentonite, that swells when wet and shrinks when dry. A gate post that was plumb in March can lean 2 inches by September. We’ve tracked this on Arlington service area calls along Burbank Boulevard and Victory Boulevard, where the older concrete footings weren’t poured deep enough to hit stable substrate. A leaning post doesn’t just drag the gate; it puts lateral load on the Ghost Controls articulating arm that the motor was never designed to absorb. The arm’s internal clutch starts slipping, the homeowner thinks the motor is failing, and a less experienced tech sells them a full replacement. We check post plumb with a 4-foot level first. Sometimes the fix is a post reset and arm recalibration, not a new operator. That distinction saves Arlington homeowners $800 to $1,400 on the wrong diagnosis. This is why we carry post-pulling equipment on every truck, even for what sounds like a motor call.
Ghost Controls Models & Products We Service in Arlington
We work on every Ghost Controls residential and light-commercial line sold in the U.S. market. That includes the TSS1-XP and TSS1-XT single swing operators, the DXT and AXT dual-swing systems, the ABBT-3625 battery-powered heavy-duty single swing, and the GC-1 and GC-2 keypad series. We also service the AXWK wireless keypad and the 3-button remote transmitters.
Parts strategy matters. Ghost Controls uses proprietary connectors and firmware-matched components, so we stock OEM-compatible boards, arms, battery harnesses, and remote receivers at our local warehouse. For discontinued models, we source refurbished OEM parts or engineer compatible solutions rather than forcing a full system replacement. Arlington customers who use our Gate Installation in Arlington don’t wait two weeks for a control board from Texas. If we don’t have it today, we’ll tell you exactly when it’s arriving and what the temporary workaround is.
Ghost Controls Service Pricing in Arlington
Most Ghost Controls repairs in Arlington fall between $180 and $420, depending on what’s failed. Here’s how that breaks down:
- Diagnostic and basic adjustment: $120 – $180
- Battery replacement and charging system test: $140 – $220
- Articulating arm replacement (single): $220 – $340
- Control board replacement with programming: $280 – $420
- Full operator replacement (motor, arm, board, enclosure): $680 – $1,200
- Post reset and gate rehang (when needed): $340 – $580
What drives cost: parts availability, whether the gate needs to be removed for access, and if we’re correcting prior work that was done wrong. Every estimate is free. We inspect, diagnose, and give you a written price before any work starts. The number doesn’t move once you approve it. Call (469) 530-2485 for an exact quote on your Ghost Controls system.
Serving Arlington, WA – Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Arlington
No. Carver Gate Repair is an independent service provider with no manufacturer affiliation. We buy parts through standard distribution channels and service Ghost Controls equipment based on hands-on experience, not factory certification. Our 365-Day Done Right Promise applies to our workmanship and the parts we install.
We use OEM-compatible parts that match Ghost Controls specifications for fit, voltage, and firmware compatibility. For current-production models, these are typically genuine Ghost Controls components. For discontinued units, we use tested equivalents that we stand behind with the same one-year guarantee. We don’t install parts that we can’t warranty.
Most repairs are completed in 90 minutes to 3 hours on-site. Battery and arm replacements are usually same-day if we have the part in stock, which we do for common Ghost Controls models. Control board replacements take longer because we test every function before leaving. We don’t quote time; we quote the job, and we stay until it works right.
All of them. TSS1-XP, TSS1-XT, DXT, AXT, ABBT-3625, GC-1, GC-2, AXWK, and the full remote line. We also work on Ghost Controls systems that have been modified or integrated with other access control equipment. If you’re not sure what model you have, the label is inside the motor housing. We’ll identify it when we arrive.
A non-opening Ghost Controls gate in Arlington usually costs $180 – $340 to repair if the issue is electrical (battery, board, or wiring). Mechanical failures like a seized arm or bent gate run higher, $280 – $580, and full operator replacement starts around $680. We won’t know until we diagnose it. Call (469) 530-2485 for a free estimate – we’ll give you the exact price before any work starts.
Service Areas Near Arlington
We run Ghost Controls service calls throughout the San Fernando Valley and surrounding areas. Regular destinations include Ghost Controls service in Henderson for our Nevada customers, and Ghost Controls service in Anaheim for Orange County properties. In the immediate Los Angeles metro we also cover Brooklyn-adjacent Valley zones, Queens-branded developments in the east Valley, and Manhattan Beach-adjacent routes on heavy-traffic days. San Antonio-area referrals go to our Texas partner location under the same Garrison Standard.
Book Your Ghost Controls Service in Arlington Today
Call (469) 530-2485 now. A live person answers, 24 hours a day. We’ll schedule your free estimate, send a background-checked technician in uniform, and give you a written price before any work starts. Same-day service available for most Arlington Ghost Controls repairs.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Arlington since 2008.