Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Cleburne
A new driveway or pedestrian gate in Cleburne typically costs between $2,800 and $9,500 installed, depending on the gate type, motor system, and site prep work. We’re Carver Gate Repair, and we install gates across Cleburne every week, from newer subdivisions near Nolan River Road to rural acreage off Highway 67. Our technicians know Cleburne’s clay soil, its power regulations, and the difference between a gate that works for a season and one that stays square for decades. If you’re researching Gate Installation in Cleburne, call us at (469) 530-2485 and we’ll walk you through what your property actually needs.
Why Carver Gate Repair Is Cleburne’s Preferred Gate Installation Company
We work to The Garrison Standard, which means written prices before any work starts, background-checked and uniformed technicians on every job, and a 365-Day Done Right Promise in writing on every repair. Homeowners in Cleburne don’t need another contractor who quotes low and invoices high. We give you a number, you approve it, and that’s the number you pay.
Lonnie Burke leads our team, and the standard he holds is straightforward: if a gate isn’t installed right, we make it right, free of charge, inside the guarantee window. That’s not a marketing line. It’s the floor for every job we take in Cleburne.
Our dispatch and scheduling run from the brand’s Dallas-Fort Worth office, and crews serve Cleburne locally. A live person answers the phone 24/7, including weekends and holidays. You won’t get a voicemail box or a call-back queue when you’re dealing with a gate stuck open or an operator that quit overnight.
Electric Gate Installation in Cleburne
Electric Gate Installation in Cleburne means more than mounting a motor to a post. It means running proper power to the operator, setting safety photocells and edge sensors, testing the UL 325 entrapment protection, and making sure the gate stops and reverses on contact every single time. On rural Cleburne lots, we regularly see operators wired to undersized or unpermitted power runs, which trips breakers and burns out control boards within months. A proper electric gate installation includes checking the circuit, sizing the wire for the distance from the panel to the gate, and pulling a permit where the county requires one.
Operator and Control Wiring
We match the operator to the gate’s weight, swing or slide direction, and daily cycle count. On a long driveway off County Road 304, the wire run can be 150 feet or more, and undersized wire causes voltage drop that kills motors. We size it correctly the first time.
Safety Testing and Compliance
Every electric gate we install in Cleburne gets tested for entrapment protection. That means the gate stops and reverses when the safety edge contacts an object or when a photocell beam is broken. We test it with weights and document the result. Skipping this step leaves a gate that can close on a person or a vehicle, and it’s not a corner we cut.
Driveway Gate Installation in Cleburne
Driveway Gate Installation in Cleburne is our most requested service, and for good reason. A driveway gate controls access to the property, keeps loose animals in and uninvited traffic out, and adds real resale value when it’s done right. In Cleburne, the job starts below ground, not at the gate itself. The clay soil here shrinks and swells with the region’s wet-dry cycles, which means post footings must be dug deeper and set in concrete below the active soil zone. Shallow footings shift, and within a season a swing or slide gate racks out of alignment so the latch no longer catches and the operator strains against the frame.
Post Footings and Ground Work
A driveway gate in Cleburne needs hinge and latch posts set below the clay active zone, typically three feet deep or more depending on the gate’s height and weight. We don’t set posts in loose fill and call it done. The concrete is placed, the post is braced square, and the gate is hung only after the footing has cured. That sequence matters on this soil.
Automation Retrofit on Existing Gates
Some Cleburne homeowners already have a manual gate and just want it automated. We can add a swing or slide operator to a structurally sound existing gate, installing the arm, limit switches, safety photocells, and any keypad or intercom entry. If the posts are undersized or leaning, we’ll tell you before we mount anything. A motor can’t fix a footy post.
Trusted Brands We Service in Cleburne
Our Cleburne technicians install and service gate operators from Linear, Viking, Ghost Controls, and DoorKing, among others. We stock common parts for these brands and can usually pull what a job needs without waiting on a multi-week backorder. If you already have a Linear arm on one side of your drive and want the other side automated to match, we can do that. If a Viking board failed after a storm, we can replace it and set the limit switches properly. Matching the right operator to the gate’s weight and cycle count is what keeps these systems alive for years, and that’s the part generalist contractors often miss. For more on what a full installation involves, see our Gate Installation service page.
Common Gate Installation Problems We See in Cleburne Homes
- Heaving hinge posts on swing gates. Cleburne’s expansive clay is brutal on shallow footings. The hinge post moves, the gate sags, and the latch no longer lines up. A proper fix means digging a new footing below the active zone, not just shimming the hinges.
- Undersized power runs to rural gates. On acreage off FM 916 or west of town toward Keene, the distance from the panel to the gate can be significant. Thin wire creates voltage drop, which overheats motors and fries control boards. We size the wire for the actual run.
- Bypassed or missing UL 325 entrapment protection. We find gates in Cleburne with no photocell and no safety edge, often because a previous installer took a shortcut. A gate that closes on a child or a car is a liability no homeowner should carry. Every install we do includes working entrapment protection and reversal testing.
- Operators mismatched to gate weight. A swing operator rated for 300 pounds will die fast if the gate it’s pulling weighs 600. We weigh the panel, check the wind load, and spec the operator accordingly. Guessing here is expensive.
Pricing for Gate Installation in Cleburne, TX
A manual driveway gate in Cleburne, installed with new posts and hardware, typically runs $2,800 to $4,800. An electric swing gate with a single operator and full UL 325 safety package runs $4,500 to $7,500. A heavy slide gate with automation on a rural lot, including the power run and a keypad or intercom, runs $6,000 to $9,500. The main cost drivers are gate weight, operator type, distance from the panel to the gate, and access for digging. You get a written price before any work starts, and that number does not move. Call (469) 530-2485 for a free estimate, and we’ll tell you straight what your Cleburne property needs.
We Also Serve Cities Near Cleburne
Our crews cover Cleburne and the surrounding communities of Keene, Joshua, Alvarado, and Burleson. If you’re outside Cleburne proper but within Johnson County, chances are we’re the crew that can get to you. For a full rundown of our local coverage, see Gate Installation in Cleburne.
Serving Cleburne, TX – Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Cleburne
The hinges aren’t the problem. Cleburne’s expansive clay shrinks and swells with seasonal moisture, and a hinge post set in shallow concrete shifts with the soil. The post heaves, the gate sags out of alignment, and tightening hinges only buys a few weeks. The lasting fix is a new post footing dug below the clay active zone and the gate re-leveled once the concrete cures. Call (469) 530-2485 and we’ll inspect the post.
Yes. Under UL 325 standards, any automated gate must have entrapment protection, which means working photocells, a safety edge, or both. A gate without them can close on a person or vehicle, and bypassing that protection is a liability no installer should leave behind. Every automatic gate we install in Cleburne gets tested for reversal on contact and obstruction detection before we call the job done.
Most driveway gate installations in Cleburne take two to four days, depending on the footing depth, the power run, and whether we’re building a new gate or automating an existing one. A straightforward swing gate with existing sound posts can often be done in two days. A slide gate on a rural lot with a long power run and new post footings may run four days. We don’t promise same-day turnaround on an installation. We schedule it properly and give you a written timeline before we start.
Yes, with conditions. Solar gate openers work well on low-cycle gates where the panel gets reliable sun year-round, which fits many rural Cleburne lots off FM 916 or County Road 304. If your gate cycles more than 15 or 20 times a day, or if the panel sits in shade much of the day, solar won’t keep up and you’ll need a line-power run instead. We’ll assess the site and tell you which way to go before you spend money.
We install and service Linear, Viking, Ghost Controls, and DoorKing operators, among others. The right brand depends on the gate’s weight, swing or slide direction, and how many cycles it runs per day. If you already have one of these systems, we can match parts and programming without ripping out a good operator for no reason. Call (469) 530-2485 and tell us what you’ve got, and we’ll tell you what it needs.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Cleburne and Johnson County with a straight price and a written guarantee on every job.