Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Oklahoma City, OK
Gate work in Oklahoma City runs into two forces that shape every job: clay soil that shifts with the seasons, and spring storm season that punishes exposed hardware. Carver Gate Repair handles both. We work exclusively on gates and gate motors across Oklahoma City, with written prices before any work starts and a live person answering the phone at (469) 530-2485, any hour, any day.
Why Oklahoma City Homes Are Different
Oklahoma City sits on expansive clay soil. It swells when wet and contracts in drought, which means gate posts set in concrete still move over time. A gate that swings clean in March can drag or bind by August after a dry stretch. Homes built in the 1960s and 1970s, common across neighborhoods like Putnam Heights and Quail Creek, often have original steel posts set shallow, and those fail first. We check post depth and plumb on every call, not just the hinge hardware.
Storm season is the other factor. High wind loads push against solid-panel gates and stress the operator arms and hinges in ways calm weather never does. We see bent articulating arms and sheared hinge bolts after spring storms move through areas like The Village and Nichols Hills. Hail and wind-driven rain also get into control boards mounted low on the post, which is why we check board seals and wire entry points whenever we’re on a property in Oklahoma City. It’s routine here, not an upsell.
Our Main Oklahoma City Services
Most calls to our Oklahoma City office fall into three buckets: a gate that won’t open or close, a gate that needs to be replaced or added, and a motor that has died or lost its programming. Each has its own page here, written so you know what the job involves before you call.
Gate Repair in Oklahoma City
A gate that drags, won’t latch, or hangs crooked is usually a post problem, a hinge problem, or a track problem. In Oklahoma City, clay-soil movement makes post shift the most common cause we see. We also replace broken wheels, straighten bent frames, and reset sagging gates on existing posts. Every repair gets a written price first, and a written one-year guarantee when the work is done. Full details are on the Gate Repair in Oklahoma City page.

Gate Installation in Oklahoma City
A new gate in Oklahoma City has to be set for the soil it stands in. We size posts for the panel weight and wind load, and we set them deep enough that the clay movement doesn’t move the gate. Whether you’re adding a driveway gate in Gaillardia or replacing a wood gate in Crown Heights, the process starts with a free measure and a written price, not a guess. See the full scope on the Gate Installation in Oklahoma City page.

Gate Motor Repair in Oklahoma City
When the gate won’t move but the panel and posts are sound, the problem is usually the operator. We troubleshoot limit switches, loop detectors, control boards, and swing or slide operators from FAAC, BFT, Linear, and Viking, among others. Oklahoma City’s lightning and power surges take out boards more often than mechanical failure does. The motor repair scope, including what we test and what we replace, is on the Gate Motor Repair in Oklahoma City page.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Oklahoma City
Our technicians are trained on FAAC, BFT, Linear, and Viking equipment, along with the other major gate-motor brands. We keep common boards, remotes, and safety-edge parts stocked locally for faster turnaround on Oklahoma City jobs, and we can order the rest without marking up the part twice. See our brands for the full list.
Pricing for Gate Company in Oklahoma City, OK
These are the typical ranges we quote in Oklahoma City. The written price for your specific job is confirmed before any work starts, so these numbers give you a working picture, not a moving target.
| Service | Typical range in Oklahoma City |
|---|---|
| Gate repair, minor (hinge, latch, wheel replacement) | $180 – $340 |
| Gate repair, moderate (post reset, frame straightening) | $340 – $620 |
| Gate repair, major (full post replacement, structural work) | $620 – $1,100 |
| Gate installation, single swing gate | $1,400 – $3,200 |
| Gate installation, double swing gate | $2,800 – $6,500 |
| Gate installation, slide gate | $3,500 – $8,000 |
| Gate motor repair, service call and diagnostic | $90 – $180 |
| Gate motor repair, limit switch adjustment or replacement | $150 – $300 |
| Gate motor repair, control board replacement | $300 – $650 |
| Gate motor replacement, operator and arm | $900 – $2,400 |
What pushes a job toward the top of these ranges in Oklahoma City is usually soil work: resetting posts in clay that has shifted, or adding concrete depth to hold a heavy panel. The price we hand you before we start is the price you pay. If something changes mid-job, we stop and put the new number in writing before continuing.
Neighborhoods We Serve in Oklahoma City
Our crews run gate repair and installation calls across the entire Oklahoma City metro, from older central neighborhoods to the newer subdivisions on the north and west sides. Response time for most gate repair calls in the metro is same-day or next-day, depending on where the crew is running that morning.
- Quail Creek
- Nichols Hills
- Putnam Heights
- Gaillardia
- Crown Heights
Service Area – Cities Near Oklahoma City
Our Oklahoma City office dispatches crews across the metro and into the surrounding communities. If you’re a few miles out, call us and we’ll tell you straight whether we can get a truck to you that day. We cover the full Oklahoma City metro area, with scheduling coordinated from our local office.
Serving Oklahoma City, OK – Our Local Coverage Area
We’re based in the Oklahoma City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Oklahoma City
Most gate repair calls in Oklahoma City are handled same-day or next-day. Emergency calls, like a gate stuck open or a motor that won’t respond, get priority routing. Call (469) 530-2485 and a live person will tell you the current dispatch window.
Most gate repairs do not require a permit. New installations may, depending on your subdivision and HOA rules. We know the common Oklahoma City HOA requirements and can tell you what applies to your street. The written quote includes any permitting steps we need to handle.
We cover the full Oklahoma City metro, including Quail Creek, Nichols Hills, Gaillardia, and the surrounding areas. If you’re unsure whether your address is in our service area, call (469) 530-2485 and we’ll confirm it in about a minute. If we can’t reach you, we’ll say so before any commitment is made.
If your gate is dragging, stuck, or the motor has stopped responding, call Carver Gate Repair at (469) 530-2485. You’ll get a live person, a straight answer on timing, and a written price before any work begins in Oklahoma City.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oklahoma City Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.





Before
After
Before
After
Before
After