Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Los Angeles?
Gate repair in Los Angeles typically runs $175 to $550 for most residential jobs, with swing gate motor replacements landing between $850 and $1,800. Simple fixes like limit switch adjustments or safety sensor realignment start around $150, while full automation overhauls on dual-swing systems can push past $2,500. Most customers using our Gate Repair services in Los Angeles know their exact cost before we start because we put the price in writing.
Gate Repair Cost Breakdown (2026)
| Service | Typical Range | What It Covers |
|---|---|---|
| Diagnostic & basic adjustment | $150 – $225 | Limit switch reset, sensor alignment, chain tension, safety check |
| Single gate opener repair | $225 – $450 | Control board, capacitor, or gear assembly on LiftMaster, FAAC, or Linear |
| Dual swing motor repair | $350 – $650 | Both operators, loop detector troubleshooting, articulating arm service |
| Single gate opener replacement | $850 – $1,350 | New unit, removal, programming, safety integration |
| Dual swing opener replacement | $1,400 – $1,800 | Matched pair, loop installation, dual remote setup |
| Gate wheel/track repair | $200 – $475 | V-wheel replacement, track realignment, ground clearance fix |
| Hinge rebuild or replacement | $175 – $400 | Heavy-duty hinge set, weld repair, post reinforcement |
| Intercom or keypad repair | $185 – $425 | Wiring, button assembly, or standalone replacement unit |
| Emergency after-hours call | $195 – $295 base + parts | Live-dispatcher response, technician dispatch, priority scheduling |
These are 2026 Los Angeles market rates. What moves a job toward the high end: hillside properties in the Hollywood Hills or Pacific Palisades where access is tight, older DoorKing or Elite systems with discontinued parts, and gates with rust damage from marine air in Marina del Rey or San Pedro. What keeps costs down: catching a failing capacitor before it fries the control board, and systems we service regularly in Pasadena or the San Fernando Valley where we keep common parts stocked.
What Affects Gate Repair Pricing in Los Angeles
- Gate type and weight. A 16-foot wrought-iron dual swing in Hancock Park needs heavier operators than a 10-foot aluminum slider in Culver City. The motor, hinges, and hardware scale with mass.
- Brand and parts availability. We carry stock for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Obsolete boards or proprietary FAAC controllers ordered from overseas add lead time and cost.
- Access and terrain. Steep driveways in the Hollywood Hills, zero-clearance installations in Venice walk streets, or gates set back behind dense landscaping in Los Feliz all add labor time.
- Electrical condition. Corroded conduit from coastal salt air in Playa del Rey, outdated low-voltage wiring in 1920s Pasadena homes, or a fried transformer means electrical prep before the gate work starts.
- Permit requirements. Los Angeles Department of Building and Safety requires permits for new gate installations and significant electrical modifications. Simple repairs to existing systems typically don’t trigger permitting, but we flag it when a job crosses that line.
- Response timing. Scheduled maintenance during business hours runs standard rates. A stuck gate at 10 PM on a Saturday in Encino gets a live dispatcher and a uniformed technician, which carries an after-hours premium.
How to Save on Gate Repair
Fix it before it breaks completely. A grinding gear assembly in a BFT operator is a $280 repair. Let it seize and you are looking at full replacement. We see this pattern repeatedly in Los Angeles, especially on systems that haven’t been serviced since installation.
Schedule seasonal lubrication and safety checks. The Garrison Standard includes a written condition report so you know which components are wearing. Catching a cracked v-wheel in Studio City before it derails saves the track, the gate, and the emergency call.
Keep your remote and keypad clean. Dirt buildup causes phantom signals that strain the control board. A $15 cleaning versus a $400 board replacement is simple math.
Ask about our written price before work starts. Every Carver Gate Repair customer gets one. No estimate that balloons once the panel is open. Call (469) 530-2485 for a free estimate and we will tell you exactly what your gate needs.
FAQs – Gate Repair Cost
How much does a typical gate motor repair cost in Los Angeles?
Most single-operator repairs run $225 to $450. That covers control boards, capacitors, gear assemblies, and limit switch replacement on brands like LiftMaster, Linear, and FAAC. Dual-swing systems with two operators or loop detector issues land in the $350 to $650 range. Call (469) 530-2485 for a written price on your specific system.
Is it cheaper to repair or replace my gate opener?
Repair is cheaper when the motor frame, gears, and housing are sound. If the control board fails on a 6-year-old LiftMaster, a $340 repair makes sense. If the same unit has stripped gears, water damage, and a failed safety sensor, replacement at $850 to $1,350 is the smarter spend. We put both options in writing so you decide with real numbers.
Why are Los Angeles gate repair prices higher than national averages?
Los Angeles runs 15% to 25% above national averages-higher than Gate Repair Cost in Miami, FL ranges-due to technician wages, fuel and vehicle costs across sprawling service areas from the Valley to the South Bay, and the prevalence of heavy custom ironwork versus lighter stock gates. Coastal corrosion from marine layer exposure also drives more frequent hardware replacement in beach-adjacent neighborhoods.
Does Carver Gate Repair charge for estimates?
No. Estimates are free. A uniformed, background-checked technician arrives in a marked vehicle, diagnoses the system, and delivers a written price before any work begins. The number does not change once the job is open. That is The Garrison Standard.
What does the 365-Day Done Right Promise cover?
Every repair is backed by a written guarantee for a full year from the date of service. If the same component fails, or the original issue returns, we come back and make it right at no charge. No argument, no re-diagnostic fee. The guarantee is not an upsell. It is non-negotiable on every job we complete in Los Angeles.
Can you repair my gate the same day I call?
We often can. Our phones are staffed by a live person 24 hours a day, including weekends and holidays. For standard repairs in central Los Angeles, the San Fernando Valley, and the Westside, same-day or next-day scheduling is typical. Emergency after-hours calls get priority dispatch. Call (469) 530-2485 to check current availability.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Los Angeles to The Garrison Standard since 2008.
What Our Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.