Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair Nationwide
A gate that won’t open, sags on its hinges, or grinds halfway and stops isn’t just an annoyance. It’s a broken piece of your property that needs a straightforward fix. Carver Gate Repair has handled gate repair across the United States since 2008, working exclusively on gates and motor systems so our technicians arrive knowing the job, not learning it on your driveway. We answer the phone with a live person 24/7, send background-checked and uniformed technicians on every call, and put a written price in your hand before any work starts. Call (469) 530-2485 and you’ll reach a person, not a voicemail.
Every repair comes with the 365-Day Done Right Promise: a written guarantee good for a full year from the date of service. If the repair fails inside that window, we come back and make it right at no charge. That’s not a sales line. It’s the Garrison Standard, the operating code every Carver location follows since 2008. Lonnie Burke built this company on a simple idea: homeowners should know the price before the work begins and know exactly who’s walking onto their property.
If you need work done right the first time, start with our home page to see the full range of what we do, or keep reading here for how gate repair works and what it costs.
Driveway Gate Repair
Driveway Gate Repair is the work of restoring a driveway gate to smooth, safe operation, whether it’s an iron swing gate that’s sagging, a sliding gate that’s binding on its track, or a motor system that’s stopped responding. Most driveway gate failures come down to a handful of causes: worn hinges, misaligned tracks, failing limit switches, dead circuit boards, or a chain or belt that’s stretched past adjustment. Carver Gate Repair diagnoses the exact failure and fixes it with parts matched to the system already installed. Expect most driveway gate repairs to run between $185 and $650 depending on the problem, with motor replacements typically landing between $650 and $1,800. For a full breakdown of what drives these numbers, see our Gate Repair pricing guide.
Worn Hinges and Sagging Gates
A gate that drags or tilts forward is almost always a hinge problem. We remove the gate, rebuild the hinge points, and rehang it so the load sits square on the posts. Left alone, a sagging gate will eventually crack the post or tear the mount entirely.
Motor and Operator Failures
When the motor runs but the gate doesn’t move, the problem is usually a stripped gear, broken chain, or failed capacitor. We bench-test the operator, replace only what’s failed, and set the travel limits so the gate stops where it should. For more involved motor work, see our gate motor repair coverage.
Gate Welding
Gate Welding is the repair of broken or cracked metal components on a gate using controlled heat fusion, restoring the original structural strength rather than patching over a break. When a steel or iron gate cracks at a weld seam, snaps a picket, or breaks loose at a hinge mount, bolts and plates won’t hold for long. Carver Gate Repair performs on-site welding repairs that match the original material and finish, so the fix is part of the gate, not a temporary brace bolted to it. Typical gate welding jobs run from $150 for a small crack repair to $800 or more for structural reconstruction of a damaged frame section.
Cracked Frame Seams
Steel gates crack at stress points, usually where the frame meets a hinge or where a diagonal brace is welded in. We grind out the cracked material, weld the joint back solid, and reinforce the area so the same crack doesn’t return. The goal is a joint stronger than the original.
Broken Pickets and Rails
When a vehicle clips a gate or a branch falls on it, individual pickets and rails take the damage. We cut out the bent or broken section and weld in matching material, then grind and paint the repair to blend with the surrounding finish. The gate stays true to its original look.
Commercial Gate Repair
Commercial Gate Repair covers the repair and maintenance of gates on business properties, industrial sites, apartment complexes, and other non-residential locations where gates see heavy daily use. These gates cycle dozens or hundreds of times per day, which means small problems become large ones quickly if they’re not addressed. Carver Gate Repair services commercial gate operators from brands like LiftMaster, DoorKing, and Elite, and our technicians are trained to work on high-cycle equipment without cutting corners. Commercial gate repair typically ranges from $250 for limit switch or safety sensor work to $2,500+ for operator replacement on high-traffic systems.
High-Cycle Operator Service
A commercial swing or slide operator that runs 300 cycles a day wears out gears, belts, and capacitors at a different rate than a residential unit. We inspect the full drive train, replace worn components before they cascade, and set the force limits so the operator isn’t fighting the gate. This is preventive work that keeps a gate in service rather than waiting for it to fail during business hours.
Safety Compliance and Obstruction Sensors
Commercial gates must stop and reverse when an obstruction is detected, and failed sensors are both a safety hazard and a liability. We test and repair photo eyes, loop detectors, and safety edges, then verify operation under real conditions. A commercial gate that doesn’t properly sense an obstruction is a serious safety issue that should be handled by a trained technician.
Iron Gate Repair
Iron Gate Repair is the restoration of gates built from iron, a material that’s strong and durable but needs periodic attention to fasteners, welds, and protective coatings. Iron gates corrode where paint wears thin, especially at weld joints and the base of pickets, and the metal expands and contracts with temperature swings in ways that eventually loosen hardware. Carver Gate Repair handles rust repair, broken weld joints, seized hinges, and realignment on iron gates of any age. Most iron gate repairs cost between $175 and $700, with larger structural jobs running higher depending on the extent of the damage.
Rust Treatment and Repainting
Surface rust on an iron gate is a warning, not a death sentence. We grind rusted areas down to clean metal, treat the surface with a rust-inhibiting primer, and repaint with a finish matched to the gate’s existing color. The repair stops the corrosion from spreading and restores the gate’s appearance.
Seized Hinges and Broken Welds
Iron gates that won’t swing smoothly usually have hinges that have corroded internally or welds that have cracked from years of stress. We replace seized hinge hardware or weld new hinge points in place, then adjust the gate so it swings level and latches cleanly. This is structural work, not cosmetic work, and it has to be done right the first time.
Sliding Gate Repair
Sliding Gate Repair is the repair of gates that move horizontally along a track or cantilever system instead of swinging on hinges. Sliding gates fail for predictable reasons: debris in the track, worn rollers, bent guide posts, misaligned chains, or a motor that’s working harder than it should. Carver Gate Repair works on slide gate systems from brands like BFT, Linear, and DoorKing, matching the repair to the specific operator and track design. Most sliding gate repairs run from $195 for roller and guide adjustments to $1,200 or more for track reconstruction or operator replacement.
Track Cleaning and Roller Replacement
Gravel, ice, and built-up grime in a track make a sliding gate labor with every cycle. We clean the track, replace worn or seized rollers, and verify the gate glides without binding. A sliding gate that moves freely puts far less stress on its motor and chain.
Chain, Belt, and Limit Switch Adjustment
When a slide gate stops short or overshoots the closed position, the limit switches or drive chain are usually the culprit. We set the travel limits precisely, tension the chain or belt to spec, and run the gate through full cycles to confirm it stops exactly where it should every time.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the specialized restoration of hand-worked iron gates, which differ from standard iron gates in their joinery and often their age. True wrought iron was worked by hand, which means repairs need to respect the original construction rather than covering it with modern plate steel. Carver Gate Repair matches materials and welding techniques to the existing gate, keeping the original character intact while restoring full strength. Typical wrought iron gate repairs run between $200 and $800 depending on how much of the ornamental work needs to be remade or refastened.
Ornamental Element Repair
Scrollwork, finials, and decorative collars on wrought iron gates take a beating from weather and time. We fabricate replacement elements that match the original pattern, then weld or fasten them in place. The finished repair should be indistinguishable from the rest of the gate.
Historical Gate Restoration
Older wrought iron gates often have value beyond their function, and homeowners want them preserved rather than replaced. We repair damaged sections, rebuild hinge points, and treat rust without altering the gate’s proportions or details. The goal is a gate that looks like it belongs where it is and works like it was built yesterday.
Metal Gate Repair
Metal Gate Repair covers gates built from steel, aluminum, or composite metal framing, which are common in modern residential and commercial installations. These gates fail differently than iron or wood: aluminum can crack at welds, steel frames can bend from impact, and hardware like cam locks and drop rods can seize. Carver Gate Repair works on all metal gate types, matching the repair method to the material. Metal gate repairs typically cost between $150 and $600, with full frame replacement on a heavily damaged gate running higher.
Aluminum Gate Crack Repair
Aluminum isn’t as forgiving as steel when it’s welded, and a bad weld will crack again. We use the correct filler material and welding parameters for aluminum, then stress-test the joint before we call the job done. A properly welded aluminum gate will hold up as well as the original.
Frame Straightening and Hardware Replacement
When a metal gate takes a hit, the frame can bend even if nothing visibly breaks. We straighten the frame back to square, replace bent or seized hardware, and rehang the gate so it latches and locks properly. Straightening is often the better call than replacing an entire gate that’s otherwise sound.
Wood Gate Repair
Wood Gate Repair is the repair and restoration of gates built from wood, including board-on-board privacy gates, cedar gates, and post-and-rail designs. Wood gates fail in predictable ways: posts rot at ground level, hinges pull loose as the wood softens, and the gate sags as the frame joints loosen. Carver Gate Repair replaces rotted sections, reinforces hinge points, and restores square to a gate that’s drifted out of alignment. Wood gate repair generally runs from $150 for a hinge and latch realignment to $700 for partial frame reconstruction or post replacement.
Post Replacement and Reinforcement
Wood gate posts rot first at the base, where water sits against the wood. We remove the rotted post, set a new post in concrete, and through-bolt the hinge hardware so it doesn’t pull loose again. A solid post is the foundation every wood gate depends on.
Frame Re-squaring and Hinge Rebuild
A wood gate that drags or won’t latch has usually lost its square. We tighten and repair the frame joints, replace pull-out hinges with longer screws or through-bolts, and add a diagonal brace if the frame needs it. The gate should swing level and close without being lifted or forced.
Brands We Service
Our technicians are trained on nine gate motor brands, and we stock OEM parts for the most common ones. DoorKing operators show up on a lot of commercial sites, and we’ve serviced hundreds of their swing and slide units, from limit switch failures to full control board replacement. Elite and Mighty Mule are common on residential properties, and we know their quirks: Elite’s force settings and Mighty Mule’s battery and solar configurations are things we diagnose daily.
LiftMaster is one of the most widespread gate operator brands in the country, and our teams replace gears, belts, and circuit boards on LiftMaster residential and light commercial units on a regular basis. Whether you have a LiftMaster, DoorKing, Elite, Mighty Mule, or any other make, we can match the right parts and the right repair process to the system that’s already installed at your property.
Signs You Need a Pro Right Now
- Gate stops mid-cycle and reverses. The controller detects an obstruction or the limit switches are failing, and the gate can’t tell open from closed. Left alone, this will burn out the motor or leave the gate stuck half-open.
- Gate moves slowly or makes grinding noise. Worn gears, dry rollers, or a binding hinge are making the motor work against the gate. The extra load shortens the life of every component in the drive train.
- Gate sags or drags on the ground. Hinges and frame joints have loosened or failed, and the full weight of the gate is now resting on its leading edge. The longer it runs this way, the more structural damage it does.
- Remote or keypad works only from close range. The receiver antenna, battery, or control board is failing, and the gate is becoming unreliable at the exact times you need it most. A technician can isolate the fault in minutes.
- Gate opens on its own or won’t close all the way. A failing loop detector, shorted wire, or wrong limit setting is causing the operator to behave unpredictably. An uncommanded gate movement is a safety issue that needs immediate attention.
Our Process, Step by Step
- 1
Call and talk to a person. Someone answers 24/7, including weekends. We listen to what’s happening with your gate, ask the right questions, and schedule a visit at a time that works for you.
- 2
Technician arrives on time, in uniform. You’ll know your technician’s name before they arrive, and they’ll carry ID. They inspect the gate, the motor, and the safety devices before touching a tool.
- 3
Written price before any work starts. We explain what’s wrong, what it will take to fix it, and what it costs. That price is in writing and it doesn’t change once the work begins. If you decide not to proceed, there’s no charge for the visit.
- 4
Repair done with matched parts. We use OEM or equivalent components matched to the system you have, not whatever is on the truck. The gate is tested through full open and close cycles before we consider the job done.
- 5
Written guarantee, explained face to face. Before we leave, you get the 365-Day Done Right Promise in writing. If that same repair fails inside a full year, we come back and fix it at no charge. No fine print, no argument.
How Much Does Gate Repair Cost?
A typical gate repair runs between $185 and $650, depending on what’s actually failed. Hinge replacement or latch adjustment sits at the lower end, while motor, circuit board, or structural frame work pushes toward the top of that range. Gate motor replacement typically runs $650 to $1,800, and commercial operator replacement can exceed $2,500 on larger systems. Welding repairs usually land between $150 and $800 depending on the extent of the damage. These are the numbers to expect when you call.
What moves the price is parts, access, and the age of the system. OEM boards and arms cost more than generic equivalents, and that’s a cost worth paying for components that mate correctly with your operator. Gates that are hard to access or that require custom fabrication take longer. You avoid overpaying by working with a company that gives you the price before the work starts, not after the gate is open. Every Carver estimate includes the full scope of work and the total cost, in writing, before you commit. For a full replacement rather than a repair, see our gate installation service.
Where We Work
Carver Gate Repair serves homeowners and businesses across the United States through local crews operating under the same Garrison Standard. Every location is independently owned and operated, and every location is bound to the same rules: written prices, background-checked technicians, and a full-year guarantee on every repair. Wherever your property is, the promise stays the same.
Frequently Asked Questions About Gate Repair
Gate repair is the process of diagnosing and fixing a gate that doesn’t open, close, latch, or move the way it should. The work covers hinges, tracks, rollers, frames, welds, operators, and safety devices. A proper gate repair restores the gate to reliable, safe operation rather than just patching the visible symptom.
Most residential gate repairs are completed in a single visit lasting one to three hours. Structural welding jobs or motor replacements may require a second visit if parts are specialized. We’ll give you a time estimate along with the written price before we start.
Most gate repairs run between $185 and $650, with motor replacements ranging from $650 to $1,800. The price depends on the failed component, the gate’s size, and the system’s age. Call (469) 530-2485 and we’ll walk through what you’re seeing and give you an honest range over the phone, then confirm the exact written price on site.
Yes. We service LiftMaster gate operators along with DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. Our technicians are trained on each brand’s specific control boards, limit settings, and drive systems, so the repair matches your equipment.
Yes. Our phones are answered by a live person 24 hours a day, 7 days a week, including weekends and holidays. If your gate is stuck open or won’t open at all, call (469) 530-2485 and we’ll get a technician scheduled as quickly as possible.
Every repair includes the 365-Day Done Right Promise in writing. That’s a full-year guarantee on the work performed, not a 30-day courtesy. If the repair fails within that year, we return and make it right at no charge.
Clear the area around the gate so the technician has room to work, and make sure the gate’s power supply is accessible. If you have remotes or keypads, have them ready so we can test the full system. Nothing else is required; we bring the tools and parts.
Schedule Your Gate Repair Service Today
A gate that doesn’t work right won’t fix itself, and the longer it runs, the more it costs to put right. Call (469) 530-2485 to schedule a visit. You’ll get a written price before any work begins, a background-checked technician at your door, and a full-year guarantee on every repair. Estimates are free, and the phone is answered by a real person, any hour of any day.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving customers nationwide since 2008.