Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Selma, TX
Gate work in Selma moves to a different rhythm than the rest of the San Antonio metro. Homes here sit on compact lots, many inside active HOAs, where a gate that stops latching isn’t just a nuisance, it’s a violation letter waiting to happen. Add the limestone shelf that complicates post setting and summer heat that cooks electronics, and you get jobs that reward a gate company that thinks through the whole system before reaching for tools. We’re Carver Gate Repair, and Selma gates are the only thing we work on. If your gate is giving you trouble, call us at (469) 530-2485.
Why Selma Homes Are Different
Selma sits on the IH-35 corridor just northeast of San Antonio, and the soil here is a mix of thin topsoil over limestone. That matters when a post needs to be set or a cantilever gate is rolling off its track because the ground shifted. Our crews plan for rock, not just dirt, which changes how we pour and how we brace.
Homeowners’ associations are the other constant. Retama Springs, Olympia, and Cibolo Crossing all carry deed restrictions on fence and gate style, color, and height. Before we recommend a replacement, we make sure the gate we’re proposing won’t get flagged. The climate adds a second layer: 100-degree afternoons bake circuit boards inside gate operators, and the thermal cycling shortens the life of wiring connections. Selma jobs tend to be about heat and hard soil as much as they are about hinges and motors.
Our Main Selma Services
Most Selma homeowners call about one of three things: a gate that won’t open, a gate that needs to be replaced, or a motor that’s stopped responding. Here’s how each one works with us.
Gate Repair in Selma
A sagging gate in Selma usually means worn hinges, a post that’s shifted in limestone, or a frame that’s twisted over years of sun exposure. We straighten, reinforce, and replace what’s failed, then check the latch and the operator so the fix holds together as one system. Wind loads along the IH-35 corridor put real stress on gates, and a repair that ignores the windward side won’t last. Gate Repair in Selma covers the full scope of what we check and fix.
Gate Installation in Selma
New gate installations in Selma don’t start with a catalog. They start with a measure of the opening, the slope, the soil, and the HOA’s requirements. Then we quote a written price that covers the gate, the posts, the hardware, and the operator if you need one. We install swing and slide gates, and we make sure not to bury electrical work that city code says must stay accessible. Gate Installation in Selma lays out what a full install includes.
Gate Motor Repair in Selma
When a gate motor stops halfway or won’t respond to the remote, the problem is usually one of three things: a failed limit switch, a burned capacitor, or a control board that’s overheated. We test each component in order, replace what’s bad, and set the travel and force limits so the gate doesn’t slam or stall. Cell reception can be weak in pockets of Selma, so we also check antenna placement when a system uses a phone app. Gate Motor Repair in Selma details how we diagnose the brands we service.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
Our technicians work on Linear, Viking, Ghost Controls, and DoorKing equipment, along with the rest of the major brands. We stock common control boards, limit switches, and remote receivers so most Selma motor repairs don’t wait on a parts shipment. See the full list on our brands page.
Pricing for Gate Company in Selma, TX
| Service | Typical range in Selma |
|---|---|
| Gate repair, general (hinges, latch, alignment) | $225 – $475 |
| Gate operator repair (circuit board, limit switch) | $275 – $550 |
| Motor replacement (operator already installed) | $650 – $1,300 |
| Gate installation – single swing (standard steel) | $1,800 – $3,200 |
| Gate installation – double swing (standard steel) | $3,200 – $5,400 |
| Gate installation – slide gate (manual) | $2,800 – $4,800 |
| Gate operator installation for new gate | $950 – $1,700 |
| Remote, keypad, or receiver repair/replacement | $110 – $250 |
| Post reinforcement or re-set | $325 – $650 |
| Loop detector or safety sensor repair | $200 – $400 |
What moves the price in Selma is usually access to the post footings. Limestone is slow to excavate, and replacing a post that’s been set shallow in rock costs more in labor than the same job on open soil. Every price we quote is written down and agreed to before we open a panel or order a part, and the number doesn’t change at the door.
Neighborhoods We Serve in Selma
We run calls across all of Selma, from the newer HOA communities to the older lots near the city center. Response time across the area runs same-day for most repairs, and we’ll give you a straight arrival window when you call.
- Retama Springs
- Olympia
- Cibolo Crossing
- Bentwood
- Selma Park
Service Area – Cities Near Selma
Carver Gate Repair offices across Texas handle gate work for homeowners who need the same written-price standard outside Selma. We also serve Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. Dispatch for Selma jobs runs through our San Antonio office, and crews serve Selma locally.
Serving Selma, TX – Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Selma
Most Selma repair calls get same-day service when you call before early afternoon. We give you a real arrival window on the phone, not an open-ended “sometime today.” Installations are scheduled within the week after the measure and written quote.
For repairs that match the existing gate, generally no. For a replacement that changes material, color, or height, most Selma HOAs require an application first. We’ll tell you what your community’s rules say before we recommend a specific gate.
Yes. Our San Antonio office schedules work across the surrounding metro, including Selma and adjacent cities. If you’re unsure whether your address falls in our service area, call (469) 530-2485 and we’ll confirm it on the spot.
If your gate won’t close, your motor is clicking without turning, or you’re ready to replace a gate that’s been patched too many times, call Carver Gate Repair at (469) 530-2485. We’ll give you a written price before any work begins, and every repair carries a written guarantee good for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.