Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Chicago, IL
Carver Gate Repair is the Chicago gate company homeowners call when a gate stops opening, a motor burns out, or a swing arm snaps in January. We focus exclusively on gates and motor systems, not as a side line. Chicago’s freeze-thaw cycle, lake-effect weather, and older housing stock put real stress on gate hardware, and most failures we see here trace back to one of those three things. If your gate is down, call (469) 530-2485 and a live person answers, day or night.
Why Chicago Homes Are Different
Chicago gates take abuse that gates in Dallas or Phoenix never see. Road salt and calcium chloride work their way into hinge bearings and operator arms. Freeze-thaw heaves shift gate posts slightly every spring, which throws off alignment enough that a limit switch reads wrong and the gate reverses or stops mid-cycle. Older homes in neighborhoods like Beverly, Edison Park, and Portage Park often have steel gates installed in the 1980s and 1990s, welded to posts set before current setback and clearance rules. Those gates can be repaired, but they sometimes need a new post footing or a re-weld rather than a simple part swap.
Chicago’s residential lots also run narrow, especially in bungalow-belt neighborhoods where the driveway gate sits close to the sidewalk and the overhead clearance under a coach house or garage beam is tight. That changes what we recommend. A swing operator that works fine on a Naperville corner lot may not fit a Lincoln Square side yard. We measure before we quote, and the written price reflects the actual site, not an assumption.
Our Main Chicago Services
Most Chicago calls fall into three categories: a gate that won’t move, a motor or control board that’s failed, or a full replacement gate that’s sized and installed for the specific site. Each has its own page with more detail.
Gate Repair in Chicago
Repair work in Chicago usually means a gate that’s sagging, dragging, or refusing to open. We see broken hinges, sheared bolts, bent tracks, rusted chain links, and limit switches that no longer line up. On a wrought-iron gate in Hyde Park or a chain-link driveway gate in Clearing, the repair often starts with finding whether the problem is mechanical, electrical, or both. We carry common parts in our Chicago trucks: hinges, rollers, chains, receiver boards, loop detectors, and safety edges. A technician shows up uniformed and background-checked, diagnoses the failure, and hands you a written price before any tool leaves the truck. Gate Repair in Chicago
Gate Installation in Chicago
New gate installation in Chicago is measured work. We check post depth below the frost line, gate weight, swing clearance, and whether the existing post footings are level after years of winter movement. In neighborhoods like Sauganash or Mount Greenwood, concrete work is common: a gate post set in a shallow footing will lean within three seasons. We order the gate to the measured opening, match the operator to the gate’s weight and duty cycle, and schedule the install for a day when the forecast gives us a clean window. The price is written on paper before anything is ordered. Gate Installation in Chicago
Gate Motor Repair in Chicago
Gate motor repair in Chicago is often an electrical diagnosis, not a mechanical one. Cold weather kills control boards, moisture gets into housings, and power surges from summer storms fry capacitors. We work on operators from FAAC, BFT, Linear, and Viking, and we stock the boards, capacitors, and limiter kits those systems use. When a motor is beyond repair, we quote the replacement cost up front, including labor, and we explain what failed and why before any money changes hands. Gate Motor Repair in Chicago
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Chicago
Our technicians are trained on FAAC, BFT, Linear, and Viking equipment, among others, and our Chicago trucks stock the boards, arms, and remotes those brands use day to day. If a part isn’t on the truck, we source it from local distributors so the wait is short. Our brands page lists the full line.
Pricing for Gate Company in Chicago, IL
| Service | Typical range in Chicago |
|---|---|
| Gate repair diagnostics (site visit) | $75 – $125, credited toward repair |
| Hinge replacement (wrought iron or steel) | $220 – $480 per hinge set |
| Gate realignment and post shimming | $190 – $390 |
| Roller or track replacement (sliding gate) | $180 – $360 per roller/track section |
| Chain replacement (slide gate) | $140 – $280 |
| Limit switch replacement | $110 – $220 |
| Gate motor replacement (operator unit) | $440 – $1,150 |
| Control board replacement | $210 – $470 |
| Full gate installation (single driveway gate) | $1,900 – $5,600 |
Prices in Chicago run toward the upper end when post footings need concrete work, the gate is heavy ornamental iron, or the operator is an older model that requires retrofitting rather than a plug-in replacement. Every job gets a written price before work starts. That number is the number on the invoice.
Neighborhoods We Serve in Chicago
Our Chicago crews cover the city and the surrounding area. Dispatch and scheduling are coordinated from our Chicago office, and we run calls in the neighborhoods below with a typical same-day or next-day response window depending on call volume.
- Beverly
- Edison Park
- Portage Park
- Hyde Park
- Sauganash
Service Area – Cities Near Chicago
While this page focuses on Chicago itself, our crews handle gates across the metro area. If you’re outside city limits, call (469) 530-2485 and we’ll confirm coverage and the soonest available window. For a broader look at what we do and where we work, start at our home page.
Serving Chicago, IL – Our Local Coverage Area
We’re based in the Chicago area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chicago
For most residential gate repairs, no. Chicago does require permits for certain structural changes, including some post installations, and homeowners associations may have their own rules about gate height, material, and appearance. When a permit or HOA approval is needed, we identify it before the work starts and include it in the written price.
We answer the phone 24/7 and dispatch from our Chicago office. For a gate stuck open, which is a security risk, we aim for same-day service in most city neighborhoods. A gate stuck closed can often be next-day. When you call (469) 530-2485, we’ll give you a real window, not a range.
Every repair carries our 365-Day Done Right Promise in writing. If the repair fails within one year, we return and make it right at no charge. If it fails again in the same window, you don’t pay a second trip fee either. The guarantee is on paper with every job, and it doesn’t require a maintenance plan to stay valid.
If your gate isn’t working and you want a written price from someone who answers the phone, call Carver Gate Repair at (469) 530-2485. We serve Chicago and the surrounding area day and night, and the estimate is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chicago Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.