Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Arlington?
Gate repair in Arlington, Texas typically runs between $175 and $650 for most residential jobs, with swing gate motor repairs averaging $280 – $480 and slide gate track work landing in the $320 – $580 range. Most repairs we complete in Arlington are diagnosed and quoted same-day, with the actual work finished within one visit. Call Carver Gate Repair at (469) 530-2485 for a written price before any work starts – estimates are free.
Gate Repair Cost Breakdown (2026)
These are the gate repair price ranges we see across Arlington neighborhoods from Dalworthington Gardens to South Cooper Street. Your written quote will match your specific gate, motor brand, and site conditions – never a ballpark that shifts once we’re on-site.
| Repair Type | Typical Range | Most Common Price Point |
|---|---|---|
| Gate motor diagnostic & reset | $125 – $195 | $150 |
| Swing gate arm / operator repair | $280 – $480 | $340 |
| Slide gate motor replacement | $420 – $780 | $560 |
| Track realignment or roller replacement | $220 – $420 | $310 |
| Limit switch or loop detector repair | $175 – $320 | $240 |
| Hinge welding / structural gate repair | $260 – $580 | $380 |
| Control board replacement | $340 – $620 | $450 |
| Safety sensor realignment or replacement | $145 – $275 | $195 |
| Emergency after-hours gate release | $195 – $350 | $250 |
What moves a job toward the top of the range: proprietary parts for older FAAC or BFT systems, gate posts settled in Arlington’s expansive clay soil after a wet spring, or motors mounted in tight masonry enclosures where access adds labor time. What keeps costs down: straightforward articulating arm swaps on LiftMaster or Mighty Mule units with standard mounting brackets and clear access.
What Affects Gate Repair Pricing in Arlington
- Motor brand and parts availability. We stock common components for all nine brands we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – but a discontinued Viking control board or an older FAAC hydraulic unit may need specialty ordering. That adds time and cost.
- Gate type and mechanism. A single swing gate with a standard articulating arm is the simplest repair. Slide gates with rack-and-pinion drives, underground operators, or bi-folding systems carry more mechanical complexity and more labor.
- Site access and soil conditions. In Arlington, the Blackland Prairie clay expands and contracts dramatically with moisture. We’ve replaced gate posts in River Legacy and Interlochen areas where seasonal shifting has pulled hinges out of plumb. Resetting a post in that soil takes longer than a standard hinge swap.
- Electrical run condition. A dedicated 110V outlet within six feet of the operator keeps labor minimal. If we’re trenching new conduit across a driveway or diagnosing a short in an existing underground run, the job extends.
- After-hours or emergency timing. Our live-answer phones run 24/7, including weekends and holidays. Emergency calls outside standard hours carry a modest premium, though the diagnosis and written price still happen before any work begins.
- Extent of damage vs. full replacement. A bent swing arm is repairable. A seized gearbox with cracked housing usually isn’t. We always quote both options when both exist, so you know where the line sits.
How to Save on Gate Repair
The cheapest repair is the one you don’t need twice. Here’s where Arlington homeowners avoid paying twice for the same problem:
- Address the small sound before it becomes a big failure. A grinding motor or slow response from the remote often means a limit switch or gear assembly is wearing. Fixing it early prevents the motor from overworking and burning out entirely.
- Keep the track and rollers clean. Slide gates along Pioneer Parkway and Collins Street collect road grit and pecan tree debris. A monthly rinse and visual check prevents the track binding that kills motors.
- Test safety systems seasonally. Photo eyes and loop detectors that drift out of alignment cause the gate to behave erratically. Many “broken” gates we diagnose in Arlington simply need a sensor realignment – a $195 job, not a $560 motor replacement.
- Get the written price before work starts. Our no-hassle upfront pricing means the number doesn’t move. No surprise charges for “extra labor” or parts markup after the job is open. You’ll know exactly what the repair costs and exactly what the 365-Day Done Right Promise covers.
- Ask about motor compatibility before upgrading. If your existing post and bracketry fit a current-model LiftMaster or Linear operator, we can often reuse hardware. That saves material cost and labor time compared to a full system redesign.
For a free estimate with a written price, call (469) 530-2485. Our phones are answered by a live person, 24 hours a day.
FAQs – Gate Repair Cost
How much does a typical gate motor repair cost in Arlington?
Most gate motor repairs in Arlington fall between $280 and $480 for swing operators and $320 to $580 for slide gate systems. A simple limit switch or circuit board replacement sits at the lower end; a full motor swap with new mounting hardware sits higher. Call (469) 530-2485 for a written quote on your specific motor brand and model – estimates are free.
Is it cheaper to repair or replace a gate motor?
Repair is cheaper when the motor frame, gearbox housing, and mounting points are intact – typically $280 – $480 versus $420 – $780 for full replacement. We replace when the motor is over 12 years old, parts are discontinued, or the housing is cracked. We’ll quote both options when both exist, so you decide with real numbers in front of you.
Why do some Arlington gate repairs cost more than others?
Clay soil movement, proprietary motor brands, and restricted access drive gate repair cost up in this market. A gate post reset in Arlington’s expansive clay after spring rains takes longer than a standard hinge repair. Older European brands like FAAC and BFT sometimes need parts shipped, adding time. Your written price reflects your actual site, not a generic average.
Does Carver Gate Repair charge for estimates?
No. Estimates are free, and every estimate includes a written price before any work starts. That price does not change once the job begins. It’s part of The Garrison Standard we’ve operated to since 2008.
What happens if the repair doesn’t hold?
Our 365-Day Done Right Promise covers every repair for a full year from the date of service. If the same component fails within that window, we return at no charge – no argument, no re-diagnostic fee. The guarantee is in writing on every invoice. Call (469) 530-2485 if you need us back.
How quickly can you repair a gate in Arlington?
Most standard repairs are scheduled within 24 – 48 hours, and emergency calls are dispatched same-day. Our phones are staffed by a live person 24/7, including weekends and holidays, so you’re not waiting for a callback queue when your gate won’t open or close.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Arlington since 2008.
Pricing reflects the Arlington market as of 2026. Carver Gate Repair offers free estimates – call (469) 530-2485.
What Our Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.