Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Fort Worth?
Most gate repairs in Fort Worth run between $195 and $650, with simple fixes like limit-switch adjustments or remote reprogramming at the low end and motor replacements or structural welding at the high end. For comparison, see How Much Does Gate Repair Cost in Houston, TX? (2026 Price Guide). The typical homeowner pays around $350 for a standard service call that includes diagnosis, parts, and labor. Emergency repairs outside normal hours, common during Fort Worth’s spring storm season, add $75 to $150 to the base rate.
Gate Repair Cost Breakdown (2026)
| Service | Typical Range | Most Common Price |
|---|---|---|
| Service call + diagnostic | $95 – $150 | $125 |
| Remote or keypad reprogramming | $125 – $195 | $150 |
| Limit switch or safety sensor replacement | $175 – $295 | $225 |
| Loop detector repair/replacement | $225 – $395 | $295 |
| Articulating arm repair (swing gate) | $275 – $495 | $375 |
| Gate motor repair (minor) | $295 – $450 | $350 |
| Gate motor replacement | $650 – $1,850 | $1,150 |
| Hinge replacement or welding (per hinge) | $195 – $350 | $250 |
| Track or roller repair (sliding gate) | $250 – $550 | $395 |
| Control board replacement | $395 – $750 | $550 |
| Emergency/after-hours surcharge | $75 – $150 | $125 |
These ranges reflect what we quote in Fort Worth neighborhoods from Wedgwood to Meadowbrook, where clay-heavy soils shift gates out of alignment more than in sandy regions. Prices climb when we need to pull a LiftMaster or FAAC motor from inventory same-day, or when a gate has been sagging so long that the post footing has cracked. We deliver a written price before any work starts, so the number you see is the number on the invoice.
What Affects Gate Repair Pricing in Fort Worth
- Gate type and mechanism. Swing operators with articulating arms take longer to diagnose than sliding gates with exposed track. A Viking or Elite swing system in Benbrook with a buried actuator requires excavation time that a surface-mounted Linear operator in Arlington Heights doesn’t.
- Motor brand and parts availability. We stock parts for nine brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – but a discontinued control board or a proprietary FAAC hydraulic unit can add a day to the job and $50 to $100 in shipping.
- Soil and weather damage. Fort Worth’s expansive clay soils swell in wet springs and shrink in dry summers. We’ve replaced posts in Ridglea Hills that tilted three inches off plumb after a single rainy season. That structural work runs past standard repair pricing.
- Access and electrical run. A gate at the end of a 200-foot driveway in Aledo with no 110V outlet nearby needs a trench and conduit. We flag this during the estimate, not after we arrive.
- Age of the system. A fifteen-year-old Mighty Mule with a fried control board often makes more sense to replace than repair. We say so in writing if that’s the case.
- Emergency timing. A gate stuck open at 10 PM on Saturday in Fairmount costs more than a Tuesday morning appointment. Our phones are answered by a live person 24 hours a day, including holidays, and we quote the after-hours rate upfront.
How to Save on Gate Repair
The cheapest repair is the one you don’t need twice. Here’s what we’ve learned across seventeen years of our Gate Repair services in Tarrant County:
- Schedule during business hours when possible. A Monday morning call saves the emergency surcharge.
- Describe the problem precisely when you call. If you tell us the Ghost Controls operator clicks but the gate doesn’t move, we bring the right solenoid and avoid a return trip.
- Keep the area clear. Our technician needs access to the motor housing and the inside face of the gate. Moving vehicles, trimming back esperanza or crape myrtle – this shaves time off the labor clock.
- Ask about motor replacement vs. repair. A $350 repair on a ten-year-old unit with a one-year guarantee may cost more over five years than an $1,100 replacement with a longer warranty. We write out both options.
- Combine jobs. If your driveway gate needs a limit switch and your pedestrian gate hinge is grinding, one trip covers both at reduced incremental cost.
Every estimate we provide is free. Call (469) 530-2485, describe what the gate is doing, and we’ll give you a range before we dispatch. No charge if you decide to wait.
FAQs – Gate Repair Cost
How much does a typical gate motor repair cost in Fort Worth?
Minor motor repairs like control board resets, capacitor replacement, or gear assembly fixes run $295 to $450 in the Fort Worth market. If the motor casing is cracked or the internal gearbox is stripped, replacement becomes the better option. Call (469) 530-2485 for a written quote on your specific motor brand.
Is it cheaper to repair or replace an old gate motor?
Replacement is usually cheaper over a five-year window if the motor is over eight years old or if parts are obsolete. A $350 repair with a one-year guarantee repeated every eighteen months exceeds the cost of a $1,150 replacement unit with a longer parts warranty. We calculate this break-even in writing before you decide.
Why do some Fort Worth gate repair companies charge half what Carver does?
Some operators quote a low dispatch fee, then add charges for “diagnostic time,” “shop supplies,” and marked-up parts at the door. Our price is written and complete before work starts, includes background-checked uniformed technicians, and carries a 365-Day Done Right Promise. The difference is in what’s guaranteed, not just what’s charged.
Does Fort Worth weather affect gate repair costs?
Yes. Hailstorms in March and April damage control boards and safety sensors. Summer heat warps vinyl components and dries out grease in articulating arms. After a storm, demand spikes and some shops add surge pricing. We don’t. Our rates are fixed, though availability tightens during peak damage periods.
What does your 365-Day Done Right Promise actually cover?
Every repair we perform in Fort Worth is covered for a full year from the date of service. If the same component fails, the same symptom returns, or the repair doesn’t hold, we come back free of charge. No argument, no re-diagnostic fee. The guarantee is in writing on every invoice.
Ready for a Written Estimate?
Call (469) 530-2485. A live person answers, day or night. We’ll ask about your gate type, the symptoms, and your Fort Worth neighborhood, then give you a price range before we schedule. If you approve, we dispatch a background-checked, uniformed technician with a written price in hand. That’s The Garrison Standard, and it’s how we’ve worked since 2008.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Fort Worth since 2008.
What Our Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.