Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Washington, DC
Carver Gate Repair is the gate company Washington homeowners call when a driveway gate stops opening at 6:45 a.m. and the car is still on the wrong side of it. We handle gate repair, gate installation, and gate motor repair across the District, from Georgetown to Capitol Hill to Chevy Chase, with written prices, background-checked technicians, and a full-year guarantee on every repair. If you need a Washington gate technician who answers the phone at (469) 530-2485 and shows up when promised, we’re the crew. Washington’s housing stock, from Federal-era rowhouses to mid-century ramblers, means no two gate setups are identical, and we plan for that before we arrive.
Why Washington Homes Are Different
Washington, DC homes create gate repair challenges that don’t show up in pamphlet-and-stucco suburbs. The District’s older neighborhoods, particularly in areas like Georgetown, Capitol Hill, and Petworth, often have narrow service alleys and tight setbacks, which means gates are frequently mounted on brick or stone piers that predate modern gate hardware. Those piers shift over decades of freeze-thaw cycles, and when a pier moves even a quarter inch, a gate sags, a latch stops catching, and a motor starts drawing more current than it should. We see this pattern regularly in Washington work.
Climate is the second factor. Washington’s humid summers cause steel gate frames to rust from the inside out, especially where the frame meets the hinge plate. Winters bring ice loading on driveway gates in neighborhoods like Cleveland Park and Tenleytown, where sloping lots mean water pools at the gate track. A gate that works fine in October can be jammed solid by February if the drainage wasn’t addressed. We check drainage on every Washington service call because it’s the difference between a repair that holds and a repair that fails in four months.
The third factor is regulation. Many Washington neighborhoods fall under Historic Preservation Review Board purview, which can affect exterior changes including gates. If you’re in a historic district, gate replacement may require a permit and design review. Our technicians know which neighborhoods require what, and we’ll tell you the truth about what your project needs before any work starts.
Our Main Washington Services
Most Washington homeowners call us for one of three things: a gate that stopped working, a gate that needs replacing, or a motor that hums but doesn’t move the gate. Each service has its own dedicated page below.
Gate Repair in Washington
Gate repair in Washington usually means a gate that’s sagging on its hinges, a latch that no longer lines up, a wheel that’s seized, or steel that’s rusted through at the base. Our technicians work on swing gates and slide gates, residential and commercial, and every job starts with a written diagnosis and a fixed price before we pick up a tool. Washington’s older brick piers make hinge replacement more delicate than in newer construction, and we’re careful to preserve the pier while correcting the gate. If your gate is the weak point in your property line, read more about Gate Repair in Washington.
Gate Installation in Washington
Gate installation in Washington means working around existing conditions that many installers won’t touch: narrow clearances, historic street-facing elevations, and HOAs with specific material requirements. We install driveway gates, pedestrian gates, and estate gates in steel, aluminum, wood, and composite, always with the operator matched to the gate’s weight and duty cycle. Washington lots often have minimal side yard space, so we measure carefully before recommending a slide gate versus a swing gate. Every installation includes the full run-through of the opener, safety edges, and limit settings before we leave, and you’ll see every number in writing before we start. Details are on our Gate Installation in Washington page.
Gate Motor Repair in Washington
Gate motor repair in Washington frequently comes down to components that weather and load have pushed past their service life: limit switches that no longer stop the gate at the right point, loop detectors that miss a car sitting on the sensor, and control boards that short after repeated power flickers during summer thunderstorms. We repair swing operators, slide operators, and the low-voltage wiring between the motor and the keypad or intercom. Washington’s damp basements and garage-mounted motors mean we also check for corrosion on terminals and ground faults that cause intermittent failures. If your opener makes noise but the gate doesn’t move, see Gate Motor Repair in Washington for the full scope.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Washington
We service and repair FAAC, BFT, Linear, and Viking gate operators in Washington, along with five other major brands, and we keep common components stocked for fast turnaround on most failures. Because we work across nine manufacturers, we’re not tied to one product line’s limitations. See our brands for the full list and the parts we carry.
Pricing for Gate Company in Washington, DC
What you’ll pay for gate work in Washington depends on what’s actually wrong, and we don’t guess before we look. Here are typical ranges for the jobs we do most:
| Service | Typical range in Washington |
|---|---|
| Gate sag or hinge repair | $180 – $340 |
| Gate latch or lock replacement | $120 – $260 |
| Wheel or roller replacement | $140 – $290 |
| Gate frame weld repair | $160 – $360 |
| Gate motor limit switch repair | $170 – $320 |
| Loop detector replacement | $220 – $420 |
| Control board replacement | $350 – $750 |
| Swing arm operator replacement | $850 – $2,200 |
| Slide gate motor replacement | $750 – $1,900 |
| Pedestrian gate replacement | $700 – $2,500 |
Washington’s older brick piers and historic-district constraints can push a job toward the upper end of these ranges, since work often has to accommodate existing stone or brick rather than start fresh. That’s fine, but you’ll always see the exact number in writing before any work begins, and that number is the number you pay. No dispatch fees added at the door, no surcharge for showing up.
Neighborhoods We Serve in Washington
We run gate service calls across the District every week. Our Washington crews are familiar with the parking and access realities of each area, so we arrive knowing what we’re walking into.
- Georgetown
- Capitol Hill
- Cleveland Park
- Petworth
- Chevy Chase
For most Washington neighborhoods, we can have a technician on site the same day for emergency repair calls, and we carry enough common parts on the truck to resolve a majority of failures in one visit. For larger installations or custom work, we schedule a free on-site measure and deliver a written price within two business days.
Service Area – Cities Near Washington
Carver Gate Repair operates throughout the greater Washington metro area. Dispatch and scheduling are coordinated from our Washington, DC office, and crews serve the District and the surrounding communities locally. If you’re within a reasonable drive of Washington, we can get a technician to you on our normal schedule.
Serving Washington, DC – Our Local Coverage Area
We’re based in the Washington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Washington
For gate repairs in Washington, we typically dispatch a technician the same day you call. Service windows are given when you book, and our technicians arrive background-checked and in uniform. For installations and custom work, we schedule a free measure first and provide a written price before any work starts. Call (469) 530-2485 and a live person will give you the first available window.
It depends on your neighborhood. Properties in Washington’s historic districts may need design review before a gate is replaced, and some HOAs require approval for any exterior change. We know which neighborhoods require what and we’ll tell you at the estimate stage whether your job needs paperwork. The permit status never surprises you, because we check before you commit.
Every Washington repair includes our 365-Day Done Right Promise in writing, good for a full year from the date of service. If the repair fails during that window, we return and fix it at no charge. That’s the standard, not an upsell, and it applies to every repair we do in Washington. Call (469) 530-2485 and a live person will schedule the return visit.
If your gate is misbehaving, call Carver Gate Repair at (469) 530-2485. A real person answers, every hour, every day. We’ll give you a straight answer, schedule a time, and arrive with the price in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Washington Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.